So I have a few Disk Systems I've been fixing & came across a very strange issue. I have a Ram adapter that always gives me Error 02. I know it isn't the Disk System, the AC adapter, or the Famicom console because I have a RAM adapter that I know is good & swapped this bad one out for the good one & didn't get the error. I was wondering if anyone has any idea how to fix this RAM adapter, I've already opened it up to check if anything was physically broken or disconnected.
Post Merge: May 08, 2017, 11:08:25 am
Figured it out! It was the cable. The only simple thing I hadn't tried was checking if there was connectivity on both sides of the cable. After checking all 11 wires I found one had a short, not to far from the RAM adapter side of the cable luckily so I had to cut it, strip all 11 cables, reconnect them all, tuck them all inside the RAM adapter housing & when I tested it that time it booted up immediately.