February 06, 2025, 02:10:18 am

-Deleted-

Started by Mi5terDNA, November 09, 2015, 04:41:16 pm

Previous topic - Next topic

Mi5terDNA

November 09, 2015, 04:41:16 pm Last Edit: February 16, 2018, 08:49:30 am by Mi5terDNA
-Deleted-

zmaster18

I have a junky Famicom I can sell for cheap. Do you mind if the controllers are also junky? And that the video is RF and hasn't been tested?

zmaster18

It most likely does work. Also, the board that I have has the plastic part of the cartridge connector snapped off. The part that sticks out and has the screw hole is where it was snapped off. It doesn't effect the inside of the cartridge slot and wouldn't be visible on the outside.

Also, I can install an AV mod if you like.  :star:

zmaster18

This pic isn't mine, but look at the blue cartridge connector. Look exactly where the little arrow is pointing to:



The part of the plastic at the end where the screw hole is has been snapped off. I still have the piece of plastic which could be glued back together if you want. The other side of the cartridge connector is perfectly fine though.