eject button replacement complete!

[kite200]

GREAT SUCCSESS!

Okay. If you need to replace an eject button you must do the following:

Unscrew the 6 screws on the bottom of the fami.
Remove the cover.
Remove the screws surrounding the RF unit and the motherboard.
Remove the RF unit and the motherboard.
turn the unit right side up again and pinch on the sides of the eject button until you can pull it off
push new eject button in while making sure the spring falls into the right place
re-assemble and your done!

[Doc]

Nice! Do you have a picture tutorial made up? We can add it to the site actually...

And thanks for that info. My eject button is TERRIBLE. I have to push really ridiculously hard for it to come up. If I push it forward too light it doesn't come up. That's the one thing I don't like about my Famicom.